manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 399

STARTING AND DRIVING

378

The intuitive parking assist may not detect the following:

Thin objects such as wire or rope

Sound wave absorbing objects such as cotton or snow

Objects with a sharp edge

Tall objects with the upper part projected

Shorter objects

Intuitive parking assist failure warning

If an error is detected when the intuitive parking assist is
turned on, the vehicle symbol comes on or flashes with
beeping sounds.

At this time steering guidance is temporarily stopped.
However, the sensors functioning properly continue their
obstacle detection.  For details, see “When the detection range
of the sensors is shorter” on page 381.

The intuitive parking assist failure warning display is not given
in either of the following operations:

Changing to another screen

Turning off the main switch for the intuitive parking assist

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands