manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 258

TOUCH SCREEN

237

G18021

When a telephone number registered in phone book is
received, the name and the number is displayed.

Received calls which you did not answer are also
memorized in the system and “Abs.” is displayed on the left
side of the number.

Unnotified telephone number such as a public telephone is
not memorized in the system.

3. Select the desired number from the list.

G18019

Touch “

”

 

or push 

 of the telephone button.

An international phone call may not be made depending on
the cellular phone which you have.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands