manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 146

EXTERIOR EQUIPMENT

125

TRUNK LID

The trunk lid can be unlocked by any of the following
ways:

Using a trunk lid opener

Using a mechanical key

Using a trunk button (with the entry function)

Wireless remote control

The explanation about how to unlock the trunk lid using a
mechanical key and trunk lid opener is made here.  For the use
of trunk button and wireless remote control, see “Smart access
system with push

−

button start” on page 10 and “Wireless

remote control” on page 31.

Using a trunk lid opener

The trunk lid opener switch is located in the switch box.

G15003

Push the button to use the switch box and then push the
trunk lid opener switch for about 1 second.

Open the trunk lid.  After operation, be sure to close the switch
box to its original position.

To close the trunk lid, lower it and press down on it.  After
closing the trunk lid, try pulling it up to make sure it is securely
closed.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands