manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 103

GAUGES, METERS AND SERVICE REMINDER INDICATORS

82

MULTI−INFORMATION DISPLAY

G13037

The multi−information display provides various
information, including your vehicle’s driving condition,
outside temperature, and warning messages if your
vehicle is in trouble.

During ordinary driving, cruise information or graphic
information is displayed.  However, if any problem occurs
in your vehicle, the display changes to a warning message
screen.

(a) Cruise information

The following information is shown with the engine switch
in “IG−ON” mode.  Each time you push the “DISP” switch,
the displayed information is changed.

Outside temperature

Available driving distance

Average fuel consumption after being refueled

Current fuel consumption

Blank

The displayed cruise information values indicate the general
driving condition and may not always reflect precise and actual
conditions.

Outside temperature

g13047

The outside temperature is displayed.  For details, see
“Outside temperature display” on page 106.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands