manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 185

OCCUPANT RESTRAINT SYSTEMS

164

G16025

Lexus strongly recommends that all infants and
children be placed in the rear seat of the vehicle and
be properly restrained.

Do not allow a child to stand up or kneel on the front
passenger seat, since the front passenger airbag
could inflate with considerable speed and force.
Otherwise, the child may be killed or seriously
injured.

Do not hold a child on your lap or in your arms.  Use
a child restraint system in the rear seat.  For
instructions concerning the installation of a child
restraint system, see ”Child restraint” on page 178.

G16026

Do not put anything or any part of your body on or in
front of the dashboard, lower portion of instrument
panel, steering wheel pad that houses the front
airbag system or in the areas where the SRS knee
airbags will inflate.  They might restrict inflation or
cause death or serious injury as they are projected
rearward by the force of the deploying airbags.
Likewise, the driver and front passenger should not
hold objects in their arms or on their knees.

If a vinyl cover is put on the area where the SRS knee
airbag will deploy, be sure to remove it.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands