manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 92

GAUGES, METERS AND SERVICE REMINDER INDICATORS

71

LIGHT SENSITIVE OPTITRON

METER

Light sensitive optitron meter reduces unwanted glare of
the instrument cluster to provide a fine view for the driver.
The reflection of the instrument cluster is adjusted
automatically depending on the lighting condition of your
surrounding.

To make an adjustment, follow the procedure below.

The reflection control switch is located in the switch box.

G13044

Push the button to use the switch box.  When you push the
“MODE” switch, the present setting appears on the
multi−information display.

To change the setting, push the “MODE” switch once and then
again within 6 seconds.  Each time you push the button, the
setting changes in the following order:

1. AUTO

−

Norm

2. AUTO

−

Lo

3. AUTO

−

Hi

4. MANUAL

−

1

5. MANUAL

−

2

6. MANUAL

−

3

7. MANUAL

−

4

The setting display goes off automatically about 6 seconds
after the “MODE” switch is pushed.  The mode shown last is
set.

After operation, be sure to close the switch box to its original
position.

CAUTION

To reduce the chance of injury in case of an accident or
a sudden stop, keep the switch box closed when not in
use while driving.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands