manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 498

IN CASE OF AN EMERGENCY

477

G40009

6. Position the jack at the jack points as shown.

Make sure the jack is positioned on a level and solid
surface.

G40010

7. After making sure no one is in the vehicle, raise it
high enough so that the spare tire can be installed.

Allow for the fact that you need more ground clearance
when putting on the spare tire than when removing the
flat tire.

To raise the vehicle, insert the jack handle into the jack
(it is a loose fit) and turn it clockwise.  As the jack touches
the vehicle and begins to lift, double

−

check that it is

properly positioned.

CAUTION

Never get under the vehicle when the vehicle is
supported by the jack alone.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands