manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 229

STEERING WHEEL AND MIRRORS

208

CAUTION

To avoid personal injury and any mirror malfunction,
do not touch the mirror while it is moving.

Do not drive with the mirrors folded backward.  Both
the driver and passenger side rear view mirrors must
be extended and properly adjusted before driving.

To reduce the chance of injury in case of an accident
or a sudden stop, keep the switch box closed when
not in use while driving.

Outer foot lights

G17015

The outer foot lights illuminate the ground near the doors
for about 15 seconds to ensure safe footing for the driver
and passengers who are about to get in the vehicle.*

The outer foot lights come on in the following conditions:

You are getting closer to the vehicle carrying an electronic
key and you enter the effective range of the entry function
(about 1 m (3 ft) from each outside door handle).

The doors are unlocked with the wireless remote control.

The doors are unlocked with the power door lock switch on
the driver’s side.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands