manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 54

KEYS AND DOORS

33

Consult the dealer or an experienced radio / TV techni-
cian for help.

FCC WARNING:
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

For vehicles sold in Canada

Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation of the
device.

REPLACING THE BATTERY

When you replace the battery, prepare a lithium battery
CR1632 or equivalent and flathead screwdrivers.  However, if
the inner parts are touched or the electronic key is dropped, it
will not function properly.  We recommend you to have an
electronic key battery replaced by your Lexus dealer.

CAUTION

Special care should be taken to prevent small children
from swallowing the removed battery or components.

NOTICE

Do not touch the components in an electronic key
with your hand.  It may cause static electricity to
occur, and an electronic key will be broken.

When replacing the electronic key battery, be careful
not to lose components.

Replace only with the same or equivalent type
recommended by a Lexus dealer.

Dispose of used batteries according to the local laws.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands