manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 442

STARTING AND DRIVING

421

CAUTION

Do not rely excessively on the vehicle stability
control system.  Even if the vehicle stability control
system is operating, you must always drive carefully
and attentively to avoid serious injury.  Reckless
driving will result in an accident.  If the slip indicator
light blinks, sounding an alarm, special care should
be taken while driving.

Only use tires of specified size.  The size,
manufacturer, brand and tread pattern for all 4 tires
should be the same.  If you use the tires other than
specified, or different type or size, the vehicle
stability control system may not function correctly.
When replacing the tires or wheels, contact your
Lexus dealer.

In situations where the road surface is covered with
ice or snow, your vehicle should be fitted with snow
tires or tire chains.

G31038

Slip indicator light

If the vehicle is going to skid during driving, the slip indicator
light blinks and an alarm sounds intermittently.  Special care
should be taken while driving.

GS430—The slip indicator light comes on when the engine
switch is selected in “IG

−

ON” mode.  The light goes off when

the engine is started.

GS300—The slip indicator light comes on for a few seconds
when the engine switch is selected in “IG

−

ON” mode.

If the indicator light does not come on when the engine switch
is selected in “IG

−

ON” mode, contact your Lexus dealer.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands