manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 289

AIR CONDITIONING

268

This button allows the air intake to select OUTSIDE AIR mode
automatically.  This is to clean up the front view more quickly.
If you want to return the setting to RECIRCULATED AIR mode,
push the air intake control button once again.

Touch the “A/C” switch for dehumidified heating or cooling.
This setting clears the front view more quickly.

To heat the vehicle interior while defrosting the windshield,
choose floor/windshield air flow.

(e) Center vents, side vents and rear vents

G21015

Center vents 

G21016

Side vents (driver’s side)

G21064

Side vents (front passenger’s side)

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands