manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 83

SWITCHES

62

CAUTION

Occupants must use caution when operating the seat
heater because they may experience minor burns even
at low temperatures.  Use extra caution for;

Babies, small children, elderly persons, sick persons
or persons with physical disabilities

Persons who have sensitive skin

Persons who are exhausted

Persons who have taken alcohol or drugs which
induce sleep (sleeping drug, cold remedy, etc.).

To prevent the seat from overheating, do not use the
seat heater with a blanket, cushion, or other insulating
objects which cover the seat.

NOTICE

Do not put unevenly weighted objects on the seat and
do not stick sharp objects (needles, nails, etc.) into
the seat.

When cleaning the seats, do not use organic
substances (paint thinner, benzine, alcohol,
gasoline, etc.).  They may damage the heater and seat
surface.

To prevent the battery from being discharged, turn
the switches off when the engine is not running.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands