manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 578

CHASSIS

557

Tire selection

When replacing a tire, use a tire of the same size and
construction, and the same or greater maximum
load as the originally installed tires.  Also, all the
tires must be the same brand and have the same
tread patterns.

Using any other size or type of tire may seriously affect
handling, ride, speedometer/odometer calibration,
ground clearance, and clearance between the body and
tires or snow chains.

Check that the maximum load of the replaced tire is
greater than 1/2 of the Gross Axle Weight Ratings
(GAWR) of either the front axle or the rear axle,
whichever is greater.  As for the maximum load of the
tire, see the load limit at maximum cold tire inflation
pressure mentioned on the sidewall of the tire, and as for
the Gross Axle Weight Ratings (GAWR), see the
Certification Label.  For details about the Certification
Label and sidewall of the tire, see pages 500 and 542.

CAUTION

Observe the following instructions.  Otherwise, an
accident may occur resulting in death or serious
injuries.

Do not mix radial, bias belted, or bias−ply tires
on your vehicle, as this may cause dangerous
handling characteristics resulting in loss of
control.

Do not use tires other than the manufacturer’s
recommended size, as this may cause
dangerous handling characteristics resulting in
loss of control.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands