manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 496

IN CASE OF AN EMERGENCY

475

G40006

 1

 Joint

 2

 When removing the jack, turn the joint by hand in

the ”contract” direction until the jack is free.

 3

 When storing, turn the joint by hand in the

”expand” direction until the jack is firmly secured
to prevent it from flying forward during a collision
or sudden braking.

G40024

To remove the spare tire:

 1

Remove the luggage tray.

 2

Loosen the bolt and remove it.

When storing the spare tire, place it with the outer side
of the wheel facing up.  Then bolt the tire in place and
install the luggage tool box to prevent the tire from flying
forward during a collision or sudden braking.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands