manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 164

OCCUPANT RESTRAINT SYSTEMS

143

Adjusting lumbar support

G16005

Push the control switch on either side.

The amount of lumbar support will change while the switch is
pushed.

REAR SEATS

Rear seat precautions

Rear seats (with SRS rear side airbags)

CAUTION

The SRS rear side airbags are installed in the outboard
rear seats.  Observe the following precautions.

Do not lean against the rear door when the vehicle is
in use, since the rear side airbag inflates with
considerable speed and force.  Otherwise, you may
be killed or severely injured.

Do not use seat accessories which cover the area
where the rear side airbags inflate.  Such accessories
may prevent the rear side airbags from activating
correctly, causing death or serious injury.

Do not modify or replace the outboard rear seats or
the upholstery of the seats equipped with rear side
airbags.  Such change may prevent the side airbag
system from activating correctly,  disable the system,
or cause the rear side airbags to inflate accidentally,
resulting in death or serious injury.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands