manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 535

ENGINE

514

– COOLING SYSTEM

Capacity

10.1 L (10.7 qt., 8.9 lmp.qt.)

Coolant type

”Toyota Super Long Life Coolant” or similar high quality ethylene glycol
based non

−

silicate, non

−

amine, non

−

nitrite, and non

−

borate coolant

with long

−

life hybrid organic acid technology (Coolant with long

−

life

hybrid organic acid technology is a combination of low phosphates and
organic acids.)

Do not use plain water alone.

NOTE:  
“Toyota Super Long Life Coolant” is used in your Lexus vehicle at factory fill.  In order to avoid technical problems, only use ”Toyota
Super Long Life Coolant” or similar high quality ethylene glycol based non

−

silicate, non

−

amine, non

−

nitrite, and non

−

borate coolant

with long

−

life hybrid organic acid technology.  (Coolant with  long

−

life hybrid organic acid technology is a combination of low

phosphates and organic acids.)  Do not use plain water alone.  Please contact your Lexus dealer for further details.

– IGNITION SYSTEM

Spark plug

– Make 

DENSO
NGK

– Gap

SK20R11
IFR6A11
1.1 mm (0.043 in.)

– ELECTRICAL SYSTEM

Battery – Open voltage at 20

C (68

F):

– Charging rates

12.7V

Fully charged

12.3V

Half charged

11.9V

Discharged

[Voltage that is checked 20 minutes after the engine switch is off with all
the lights turned off]
5A max.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands