Lexus GS300 User Manual Download Page 340

Page: 340 / 622

AUDIO

319

Changing the subtitle language—

G22037

Each time you touch “Sub title”, the language is selected
from the ones stored in the discs and changed.

To turn off the subtitle, touch “Hide”.

Touch “Back”, and the previous screen returns.

Changing the audio language—

G22038

Each time you touch “Audio”, the language is selected
from the ones stored in the discs and changed.

Touch “Back”, and the previous screen returns.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS300

Reviews:

Brands by name

Popular brands

Lexus GS300, User Manual

Search results

Summary of Contents for GS300

Reviews:

Brands by name

Popular brands