manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 272

TOUCH SCREEN

251

(b) Background color

You can select a background color.

G18035

Select the desired background color and then touch the
“OK”.

Screen adjustment

You can adjust the brightness or contrast of the screen
depending on the brightness of your surroundings.  You
also can turn the display off.

To display the “Display” screen, push the “DISPLAY”
button.

G18036

Contrast and brightness adjustment

CONTRAST “+”: Strengthens the contrast of the screen.

CONTRAST “–”: Weakens the contrast of the screen.

BRIGHTNESS “+”: Brightens the screen.

BRIGHTNESS “–”: Darkens the screen.

The screen turns off when you push the “SCREEN OFF”.  To
turn the display screen back on, push any bezel switch such
as “INFO”, etc.  The selected screen appears.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands