manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 193

OCCUPANT RESTRAINT SYSTEMS

172

CAUTION

SRS side airbags and curtain shield airbags inflate with
considerable force.  To reduce the possibility of death
or serious injury when they inflate, the driver, front
passenger and rear outboard passengers must:

Wear their seat belts properly.

Remain properly seated with their backs upright and
against the seats at all times.

G16137

Do not allow anyone to lean against the door when
the vehicle is in use, since the side airbag and curtain
shield airbag could inflate with considerable speed
and force.  Otherwise, he/she may be killed or
seriously injured.  Special care should be taken
especially when you have a small child in the vehicle.

Sit up straight and well back in the seat, distributing
your weight evenly in the seat.  Do not apply
excessive weight to the outer side of the seats with a
side airbag, and to the front pillar, rear pillar and roof
side rail with a curtain shield airbag.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands