manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 461

STARTING AND DRIVING

440

NOTICE

Have the tires, wheels or sensors replaced and ID
codes registered by Lexus dealer.  If you need
sensors, purchase from Lexus dealer.

The sensor nuts should always be tightened to a
torque of 4 N·m (0.4 kgf·m, 2.9 ft·lbf).

The use of non−genuine wheels will cause the tire
pressure sensors to transmit the electronic code in
different manner, resulting in the failure of the
system.

Tire pressure warning system reset switch

G31004

The tire pressure warning system needs to be initialized
in the following conditions:

After replacing or rotating tires or wheels

After replacing the tire pressure sensor

When initializing the system, the present tire condition is
stored as a standard.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands