manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 124

INTERIOR EQUIPMENT

103

LUGGAGE COMPARTMENT LIGHT

G14035

To turn on the luggage compartment light, open the trunk
lid or push the switch.  Closing the trunk lid will turn the
light off.

CLOCK

G14007

The digital clock indicates the time with the engine switch
in “ACC” or “IG−ON” mode.

Vehicles with navigation system:  The clock can be
corrected manually or automatically using signals from the
GPS.  For details, see the separate “Navigation System
Owner’s Manual”.

Vehicles without navigation system:  To adjust the clock or
set the daylight saving time, follow the procedures below.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands