manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 147

EXTERIOR EQUIPMENT

126

CAUTION

Keep the trunk lid closed while driving.  This not only
keeps the luggage from being thrown out, but also
prevents exhaust gases from entering the vehicle.

Always lock the trunk lid and all doors, and keep
away the vehicle keys out of children’s reach.

Never leave children unattended in the vehicle.  Un
supervised children may lock themselves in the
vehicles or trunk and suffer serious injuries or death.

To reduce the chance of injury in case of an accident
or a sudden stop, keep the switch box closed when
not in use while driving.

Trunk lid opener main switch

G15005

 1 Main switch    2 Operative   3 Inoperative

If you do not want to activate the trunk lid opener system,
turn off the main switch in the glove box.  To turn it on,
push in the main switch.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands