manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 421

STARTING AND DRIVING

400

G31013

Dynamic radar cruise control should not be used in
circumstances which are inappropriate for any cruise control
such as entering freeway on

−

ramps or off

−

ramps.

CAUTION

The dynamic radar cruise control should not be used
when exiting from, or when entering or merging onto a
freeway.  When you are following a slower moving
vehicle and exiting, the sensor does not detect the
vehicle and will accelerate to preset speed.

G31015

CAUTION

If other vehicles are driving outside of the millimeter
wave radar detection range, a delay in the detection
of the vehicle cutting in at short range or detection
failure of the motorcycle running on the side of the
same lane will occur.  In this case, the dynamic radar
cruise control system will not function properly.

When a slower vehicle in front of you leaves the lane,
the dynamic radar cruise control will no longer detect
a vehicle ahead and will attempt to accelerate the
vehicle to the faster preset speed.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands