manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 409

This ISM device complies with Canadian ICES

−

001.

Cet appareil ISM est conforme a la norme
NMB

−

001 du Canada.

STARTING AND DRIVING

388

For vehicles sold in Canada.

REAR VIEW MONITOR SYSTEM

The rear view monitor system assists the driver by
displaying an image of the rear of the vehicle while
backing up.  The displayed image on the screen is a
horizontally reversed mirror image of the inside rear view
mirror.

To display the rear view image on the screen, place the
selector lever in the “R” position when the engine switch
is selected in “IG−ON” mode.

If you move the selector lever out of the “R” position, the screen
returns to the previous screen.  Operating another function of
the navigation system will display another screen.

The rear view monitor system is a supplemental device
intended to assist back up.  When backing up, be sure to check
behind and all around the vehicle visually.

Vehicles with intuitive parking assist—
When the intuitive parking assist is turned on and an obstacle
is detected in front or rear of your vehicle, a warning appears
on the right top of the rear view monitor.  For details, see
“Intuitive parking assist” on page 365.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands