manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 175

OCCUPANT RESTRAINT SYSTEMS

154

G16014

To connect the extender to the seat belt, insert the tab into
the seat belt buckle so that the ”PRESS” signs on the
buckle release buttons of the extender and the seat belt
are both facing outward as shown.

You will hear a click when the tab locks into the buckle.

When releasing the seat belt, press on the buckle release
button on the extender, not on the seat belt.  This helps prevent
damage to the vehicle interior and extender itself.

When not in use, remove the extender and store in the vehicle
for future use.

CAUTION

After inserting the tab, make sure the tab and buckle
are locked and that the lap and shoulder portions of
the belt and the seat belt extender are not twisted.

Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab and
buckle.

If the seat belt does not function normally,
immediately contact your Lexus dealer.  Do not use
the seat until the seat belt is fixed, because it cannot
protect an adult occupant or your child from injury.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands