manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 528

INTRODUCTION

507

POSITIONING THE JACK

G61006

Front

G61007

Rear

When jacking up your vehicle with the jack, position the
jack correctly as shown in the illustrations.

CAUTION

When jacking, be sure to observe the following to re-
duce the possibility of personal injury:

Follow jacking instructions.

Do not put any part of your body under the vehicle
supported by the jack.  Personal injury may occur.

Do not start or run the engine while your vehicle is
supported by the jack.

Stop the vehicle on a level firm ground, firmly set the
parking brake and put the transmission in “P” posi-
tion.

Make sure to set the jack properly in the jack point.
Raising the vehicle with jack improperly positioned
will damage the vehicle or may allow the vehicle to fall
off the jack and cause personal injury.

Never get under the vehicle when the vehicle is sup-
ported by the jack alone; use vehicle support stands.

Do not raise the vehicle with someone in the vehicle.

When raising the vehicle, do not place any objects on
top of or underneath the jack.

NOTICE

Make sure to place the jack correctly, or your vehicle
may be damaged.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands