manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 525

INTRODUCTION

504

Removing the engine compartment cover

Before checking and replacing the blade type fuses, etc.
in the engine compartment, remove the engine
compartment cover as follows:

G61004

CAUTION

Be sure to turn off the engine before removing the
engine compartment cover.  Failure to do so may result
in burns from heated components or serious injury
through becoming caught in moving parts.

You must remove the front cover before removing the side
covers.  The location of the plastic clips is the same for all
engine models.

 1

Turn the plastic screw until it turns freely.  Although it is
turned freely, it cannot be removed from the engine
compartment cover.

 2

Push the core of the clips and remove the clips.

Remove the cover.  Be careful not to lose the removed plastic
clips.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands