manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 507

IN CASE OF AN EMERGENCY

486

(d) Emergency towing

G40019

If towing is necessary, we recommend you to have it done
by your Lexus dealer or a commercial tow truck service.

If towing service is not available in an emergency, your
vehicle may be temporarily towed by a cable or chain
secured to the emergency towing eyelet.  Use extreme
caution when towing the vehicle.

To install the front towing eyelet, see “Installing towing eyelet”
on page 488.

NOTICE

Only use specified towing eyelet; otherwise your
vehicle may be damaged.

Never tow a vehicle from the rear with four wheels on
the ground.  This may cause serious damage to the
transmission.

A driver must be in the vehicle to steer it and operate the
brakes.

Towing in this manner may be done only on hard

−

surfaced

roads for a short distance and at low speeds.  Also, the wheels,
axles, drive train, steering and brakes must all be in good
condition.

CAUTION

Use extreme caution when towing the vehicle.  Avoid
sudden starts or erratic driving maneuvers which would
place excessive stress on the emergency towing eyelet
and towing cable or chain.  The eyelet and towing cable
or chain may break and cause serious injury or damage.

NOTICE

Use only a cable or chain specifically intended for use
in towing vehicles.  Securely fasten the cable or chain
to the towing eyelet provided.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands