manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 509

IN CASE OF AN EMERGENCY

488

Tips for towing a stuck vehicle:

The following methods are effective to use when your
vehicle is stuck in the mud, sand or other condition from
which the vehicle cannot be driven out under its own
power.  Use extreme caution when towing the vehicle.  In
addition, keep away from the vehicles and towing cable or
chain when towing.

Remove the sand and soil in the front and the back of the
tires.

Place stones or wood under the tires.

(e) Installing towing eyelet

G40020

1. Remove the front towing eyelet cover on the front bumper
by using a flathead screwdriver.  To protect the bodywork,
place a piece of rag over the cover.

G40021

2. Use the towing eyelet in the trunk.  Secure it to the hole on
the bumper by turning clockwise.  (For the eyelet location, see
page 474.)

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands