Lexus GS300 User Manual Download Page 495

Page: 495 / 622

IN CASE OF AN EMERGENCY

474

G40005

When closing the board, replace the hook also in its
original position as shown.

NOTICE

If you close the trunk lid with the board hooked,
the hook may be damaged.

G40023

Wrench

Towing eyelet (for emergency towing)

Jack handle

Screwdriver

Spare tire

Wrenches

Pliers

Jack

3. Get the jack, wrench and spare tire.

To prepare yourself for an emergency, you should
familiarize yourself with the use of the jack and each tool,
and their storage locations.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS300

Reviews:

Brands by name

Popular brands

Lexus GS300, User Manual

Search results

Summary of Contents for GS300

Reviews:

Brands by name

Popular brands