Lenovo ThinkServer RS110, Hardware Maintenance Manual

Page: 91 / 252

Removing a CD or CD/DVD combination drive
To remove the CD or CD/DVD combination drive, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 57.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables. Remove the cover (see “Removing the cover” on page 60).
3. Pull the release tab (the rear of the drive-retention clip) toward the right side of
the server to release the clip; then, while you pull the tab, pull the drive out of
the bay.
Note: You might have to push the right-rear corner of the drive toward the front
of the server to move the drive initially.
4. Remove the retention clip from the drive and save for future use.
5. If you are instructed to return the CD or CD/DVD drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing a CD or CD/DVD combination drive
To install the replacement CD or CD/DVD combination drive, complete the following
steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 57.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables. Remove the cover (see “Removing the cover” on page 60).
Chapter 4. Removing and replacing server components
73