Lenovo ThinkServer RS110, Hardware Maintenance Manual

Page: 100 / 252

Removing the operator information panel assembly
To remove the operator information panel assembly, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 57.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables.
3. Remove the server from the rack and remove the cover (see “Removing the
cover” on page 60).
4. Remove the screws that secure the operator information panel assembly to the
CD/DVD bay housing.
5. Lift the operator information panel assembly out of the server.
6. Disconnect both cables from the operator information panel board.
7. If you are instructed to return the operator information panel assembly, follow all
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Installing the operator information panel assembly
To install the replacement operator information panel assembly, complete the
following steps:
1. Guide the operator information panel assembly into position on top of the
CD/DVD bay housing. Make sure that the LEDs and the USB connectors are
aligned with the openings in the bezel and that the holes in the board align with
the screw holes in the top of the bay housing.
2. Use the screws that you removed in step 4 of “Removing the operator
information panel assembly” to secure the operator information panel assembly
onto the top of the CD/DVD bay housing.
3. Connect the light panel cable and front USB cable to the operator information
panel board.
4. Install the cover (see “Installing the cover” on page 61).
5. Slide the server into the rack.
6. Connect the cables and power cords.
7. Turn on all attached devices and the server.
82
ThinkServer RS110 Types 6435, 6436, 6437 and 6438: Hardware Maintenance Manual