Kyocera TASKalfa 3010i, Service Manual

Page: 517 / 734

2NL/2P8
2-4-12
*: Ignored in some emulation modes.
Automatic continue for ‘Press
GO’ Y0 0: Off
1: On 0
Automatic continue timer Y1 Value in units of 5 seconds (1 to 99) 6 (30 s)
Error message for device error Y3 0: Not detect
127: Detect 127
Duplex operation for specified
paper type
(Prepunched, Preprintedand
Letterhead) Y4 0: Off
1: On 0
Default operation for PDF direct
printing Y5 0: Enlarges or reduces the image to fit in the
current paper size. Loads paper from the
current paper cassette.
1: Through the image. Loads paper which is
the same size as the image.
2: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
3: Through the image. Loads Letter, A4 size
paper depending on the image size.
8: Through the image. Loads paper from the
current paper cassette.
9: Through the image. Loads Letter, A4 size
paper depending on the image size.
10: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
0
e-MPS error Y6 0: Does not print the error report and display
the error message.
1: Prints the error report.
2: Displays the error message.
3: Prints the error report and displays the error
message.
3
a. Characters higher than 127 are printed regardless of the C8 value. However, setting C8 to 0 does not
print character code 160.
Item FRPO Setting values
Factory
setting