Kyocera TASKalfa 3010i, Service Manual

Page: 491 / 734

2NL/2P8
2-3-20
Connected to
key card 2 5V1 - - Not used
3 5V1 - - Not used
4 5V1 - - Not used
5 5V1 - - Not used
6 5V1 - - Not used
7 5V1 - - Not used
8 5V1 - - Not used
9 MK2_ENBL I 0/3.3 V DC Key card enabling signal
10 24V1 O 24 V DC 24 V DC power output to Key counter
11 MK2_RKEY7 O 0/3.3 V DC Key card control signal
12 MK2_RKEY6 O 0/3.3 V DC Key card control signal
13 MK2_RKEY5 O 0/3.3 V DC Key card control signal
14 MK2_RKEY4 O 0/3.3 V DC Key card control signal
15 MK2_RKEY3 O 0/3.3 V DC Key card control signal
16 MK2_RKEY2 O 0/3.3 V DC Key card control signal
17 MK2_RKEY1 O 0/3.3 V DC Key card control signal
18 MK2_RKEY0 O 0/3.3 V DC Key card control signal
19 GND - - Ground
20 MK2_COUNT O 0/3.3 V DC Key card count signal
YC31
1 GND - - Ground
Connected to
high voltage
PWB 2 GND - - Ground
3 DLP_CNT O Analog Developer DC output change signal
4 DLP_CLK O 0/3.3 V DC(pulse) Developer ACC lock signal
5 SEP_SEL O Analog Separation DC output change signal
6 SEP_REM O 0/3.3 V DC Separation DC output: On/Off
7 TRA_CNT O Analog Transfer DC output control signal
8 DC_REM O 0/3.3 V DC Chager DC/Transfer DC output: On/Off
9 MC_ISENS I Analog Chager output current detection signal
10 MC_DCCNT O Analog Chager DC outputo control signal
11 MC_ACCNT O Analog Chager AC output control signal
12 MC_CLK O 0/3.3 V DC(pulse) Chager ACC lock signal
13 24VIL3 O 24 V DC 24 V DC power output to HVPWB
14 24VIL3 O 24 V DC 24 V DC power output to HVPWB
YC32
1 24V1 O 24 V DC 4 V DC power output to coin vender
Connector Pin Signal I/O Voltage Description