Kendro HERAcell 150, Operating Instructions Manual

Page: 215 / 251

HERAcell
®
, HERAcell
®
150 and HERAcell
®
240, Main PCB Replacement
8
3) Release the cal - key, then press it twice and hold it (you will be in function level 601,
sublevel 2).
4) Using the ? - key, select “1” and release the cal - key.
5) Press the cal key three times, then hold it (you will be in function code 601, sublevel 1.)
6) Using the ? - key until the selected parameter set will be displayed. Releasing the cal -
key will store the settings and initiate a device reset.
8-digit check of both displays, and all LEDs are on.
If High/Low moisture has been configured, the associated LED will also light
up during the 8-digit check.
The version of the current software versions are displayed:
P 1 (display PCB): e.g., 004, that is, Version 4
P 2 (sensor PCB): e.g., 015, that is, Version 15
P 3 (main PCB): e.g., 202, that is, Version 202
Pr (parameter set) the new selected parameter set
The device then displays the current actual values.
The program versions P1, P2 and P3 must be provided for all questions, particularly
those concerning software problems.