Kendro HERAcell 150, Operating Instructions Manual

Page: 122 / 251

Name/Name Datum/Date Benennung/Designation
Erstellt/Prepared
D.Dornseiff 01/15/98
Index Änderung Name/Name Datum/Date
Service Handbuch HERAcell 150
Service Manual HERAcell 150
C 202613 D.Dornseiff 06/26/03
Dokumentnr./Document No. Seite/Page
Datei/File
50051109_04_EN_C.doc 50051109 / C 16/ 9
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung oder Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen ver-
pflichten zu Schadensersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmustereintragung vorbehalten. © Kendro Laboratory Products GmbH, Germany
8 Door heating factor, on/off
FL position FL value range Description
1 PH0
PH1 Door heating factor OFF
Door heating factor ON
2 0.0 .... 3.0 Door heating factor
Factory setting: Door factor ON = PH1. May not be changed!
When replacing the main board, the door heating factor for the model in
question must be checked in function level 8, position 2. Readjust if neces-
sary:
Units with stainless steel interior fittings: 1.4
Units with copper interior fittings:
2.2
9 Display brightness
FL position FL value range Description
1 1 .... 15 Display brightness
Factory setting: Brightness stage 8
10 Auto-zero settings
FL position FL value range Description
1 0 / 1 auto-zero not configured/configured
2 0 ... 100 Interval between two auto-zeros, or
Interval between door closure and next
auto-zero, in hr.
3 0 ... 10.0 Flush time (auto-zero valve on), in
min.
4 0 ... 20.0 Compensation time after valve clo-
sure, in min.
5 Display auto-zero value
Factory setting: 1; 6hr.; 1,5 min.; 11 min.