Kendro HERAcell 150, Operating Instructions Manual

Page: 120 / 251

Name/Name Datum/Date Benennung/Designation
Erstellt/Prepared
D.Dornseiff 01/15/98
Index Änderung Name/Name Datum/Date
Service Handbuch HERAcell 150
Service Manual HERAcell 150
C 202613 D.Dornseiff 06/26/03
Dokumentnr./Document No. Seite/Page
Datei/File
50051109_04_EN_C.doc 50051109 / C 14/ 9
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung oder Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen ver-
pflichten zu Schadensersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmustereintragung vorbehalten. © Kendro Laboratory Products GmbH, Germany
2 Adjustments for regulating range 2 (decontamination mode, 0 - 100 °C)
CAUTION: Specified set value = 90 °C
FL position FL value range Description
1 0 = (+) / -0 = (-) Temperature offset value sign
2 0 ..... 99 Decontamination temperature offset
value, in °C
3 0. ..... 1 Decontamination temperature amplifica-
tion, pre-decimal places
4 000 ..... 999 Decontamination temperature amplifica-
tion, decimal places
5 55 ..... 90 Decontamination temperature set value
(90°C)
6 30 ..... 999 Decontamination hold time, in min. (total
time = equilibrium time + time at 90°C *)
* This holding time begins when the unit reaches the lower limit band value for the
90°C routine, that is, 85°C. The specified set value of 540 min. may not be changed!
3 Outputs, manual control (main PCB)
FL position FL value range Description
1 0 / 1 Heater actuator, unit body: X5...X8
2 0 / 1 Heater actuator, unit door: X3
3 0 / 1 Heater actuator, base: X10
4 0 / 1 Actuator, CO
2
valve: JP5
5 0 / 1 Actuator, common alarm: X11
6 0 / 1 Actuator, horn
7 0 / 1 Actuator, fan
8 0 / 1 Actuators remain active as long as the
cal key is pressed.
9 0 / 1 O
2
valve switch
The output actuators can be manually activated on this function level. The switch state
(1) can be reset by:
- Manually returning it to 0, or;
- Performing a mains reset.