Kendro HERAcell 150, Operating Instructions Manual

Page: 206 / 251

Gas Tight Screen for the HERAcell
®
and HERAcell
®
150, Retrofit
Version: 07.2003 / 50078424
13
Chart 1: function level 21
21 Configuration of the unit
FE position FE value range Description
1 0 = Heracell 150
1 = Heracell 240 Configure unit size
2 0 = Stainless steel
1 = Copper Configure innercasing material
3 0 = 230 Volt
1 = 120 Volt Configure mains voltage
4 0 = not installed
1 = installed Configure gas tight screen
5 0 = no O
2
1 = 5 ... 90% O
2
2 = 1 ... 21% O
2
Configure O
2
6 0 = not installed
1 = installed Configure bottle turning device
7 0 = standart TCD or IR
1 = Auto-Zero-measuring
cell Configure installed measuring cell
8 0 = not installed
1 = installed Configure water level sensor
9 0 = inactive
1 = active Configure low humidity option
10 0 = not installed
1 = installed Gas guard CO
2
11 0 = not installed
1 = installed Gas guard O
2
/N
2
12 0 - without function -
13 0 - without function -
14 0 - without function -
15 0 - without function -
16 0 - without function -
17 0 - without function -
18 0 - without function -
19 0 - without function -
20 0 / 1 Start write pocess
21 0 / 1 Security bit for position 1-10
For initial configuration only !
Using this function will overwrite all unit adjustments on the main board!
When FE 601 is called up, the system jumps to FE 21