Kendro HERAcell 150, Operating Instructions Manual

Page: 183 / 251

Lockable door for HERAcell
®
, HERAcell
®
150 and HERAcell 240
2
Index
1. General information 2
2. Scope of supply 2
3. List of tools required 2
4. Retrofit door lock 3
4.1 HERAcell, HERAcell 150 and HERAcell 240; non stacked devices 3
4.2 HERAcell and HERAcell 150; door lock above 4
4.3 HERAcell and HERAcell 150; door lock below 6
4.4 HERAcell 240; door lock above 8
4.5 HERAcell 240; door lock below 10
1. General Information
This assembly instruction describes the process for retrofitting the CO
2
incubators HERAcell
®
,
HERAcell
®
150 and HERAcell
®
240.
This door lock can be retrofitted to all CO
2
incubators HERAcell, HERAcell 150 and HERAcell 240.
The device must be removed from service to perform the retrofit work.
The device should be standing on a firm base.
2. Scope of supply

Pos. 10 Door lock 1 pc.

Pos. 20 Drilling jig 1 pc.

Pos. 30 Screw M4 x 20 2 pc.

Pos. 40 Screw B3, 9 x 19 2 pc.

Pos. 50 Washer A4, 3 2 pc.

Pos. 60 Assembly instruction 1 pc.
3. List of tools required

Screwdriver for slotted head screws

Screwdriver for positive head screws

Hammer

Center punch

Waterproofed pen

Power drill

Drill, 3 mm diameter

Drill, 6 mm diameter

Drill, 8 mm diameter

Counter sink