![background image](http://html2.mh-extra.com/html/keithley/6517a/6517a_user-manual_4066185021.webp)
General Information
1-3
Model 4288-1 Single Fixed Rack Mount Kit:
Mounts a sin-
gle Model 6517A in a standard 19-inch rack.
Model 4288-2 Side-by-side Rack Mount Kit:
Mounts two
instruments (Models 182, 428, 486, 487, 2001, 2002, 6517,
6517A, 7001) side-by-side in a standard 19-inch rack.
Model 4288-3 Side-by-side Rack Mount Kit:
Mounts a
Model 6517A and a Model 199 side-by-side in a standard
19-inch rack.
Model 4288-4 Side-by-side Rack Mount Kit:
Mounts a
Model 6517A and a 5
¼
-inch instrument (Models 195A, 196,
220, 224, 230, 263, 595, 614, 617, 705, 740, 775, etc.) side-
by-side in a standard 19-inch rack.
Model 5156 Electrometer Calibration Standard Set:
This
calibration fixture contains standardized resistors and capac-
itors needed to calibrate the Model 6517A.
Model 6517-ILC-3 Safety Interlock Cable:
Designed to
connect the lid interlock circuit of the Model 8009 test fix-
ture to the interlock circuit of the Model 6517A.
Model 6517-RH Humidity Probe with Cable:
This sensor
allows the Model 6517A to make relative humidity measure-
ments (0 to 100%). Also included is an extension cable (part
number CA-129-1).
Model 6517-TP Thermocouple with Leads:
This type K
thermocouple sensor allows the Model 6517A to make exter-
nal temperature measurements from -190°C to 1350°C.
Model 6521 Low Current Scanner Card:
This 10-channel
low current scanner card is terminated with BNC connectors
and plugs into the option slot of the Model 6517A.
Model 6522 Low Current/Low Voltage Scanner Card:
This 10-channel low current/low voltage scanner card is ter-
minated with triax connectors and plugs into the option slot
of the Model 6517A.
Model 6524 Hi-R Software Package:
Designed to aid in
making more repeatable high resistance/resistivity measure-
ments. Four windows-driven programs increase measure-
ment precision, ease download and analysis of Hi-R data,
and allow cross-correlation of environmental factors.
Models 7007-1 and 7007-2 Shielded IEEE-488 Cables:
Connect the Model 6517A to the IEEE-488 bus using shield-
ed cables and connectors to reduce electromagnetic interfer-
ence (EMI). The Model 7007-1 is one meter long; the Model
7007-2 is two meters long.
Models 7078-TRX-3, 7078-TRX-10 and 7078-TRX-20
Triax Cables:
These are low noise triax cables terminated at
both ends with 3-slot male triax connectors. The -3 model is
3 ft. (0.9m) in length, the -10 model is 10 ft. (3m) in length,
and the -20 model is 20 ft. (6m) in length.
Model 7078-TRX-TBC Connector:
This is a 3-lug female
triax bulkhead connector with cap for assembly of custom
panels and interface connections. Suitable for use with the
Model 6517A V-Source in high voltage applications.
Model 8002-ILC-3 Safety Interlock Cable:
Designed to
connect the lid interlock circuit of the Model 8002A test fix-
ture to the interlock circuit of the Model 6517A.
Model 8002A High Resistance Test Fixture:
Used with the
Model 6517A to make accurate high resistance measure-
ments of DUT. Designed to minimize leakage currents that
can corrupt the integrity of the measurement.
Model 8009 Resistivity Test Fixture:
This is a guarded test
fixture for measuring volume and surface resistivities. It can
accommodate sheet samples 64 to 102mm (2-1/2 to 4 in.) in
diameter and up to 3.175mm (1/8 in.) thick.
Models 8501-1 and 8501-2 Trigger Link Cables:
Connect
the Model 6517A to other instruments with Trigger Link
connectors (e.g., Model 7001 Switch System). The Model
8501-1 is one meter long; the Model 8501-2 is two meters
long.
Model 8502 Trigger Link Adapter:
Allows you to connect
the Trigger Link of the Model 6517A to instruments that use
the standard BNC (In/Out) external triggering technique.
Model 8530 IEEE-488 to Centronics Printer Adapter Ca-
ble:
Translates the IEEE-488 connector pinout and signal
level to a Centronics termination. This permits a standard
Centronics parallel printer to be connected to a Model
6517A in TALK-ONLY mode.
Model 8606 High Performance Probe Tip Kit:
Consists of
two spade lugs, two alligator clips, and two spring hook test
probes. (The spade lugs and alligator clips are rated at 30V
RMS, 42.4V peak; the test probes are rated at 1000V.) These
components are designed to be used with high performance
test leads terminated with banana plugs, such as the Model
8607 High Performance Banana Cables.
Model 8607 High Performance Banana Cables:
Consists
of two high voltage (1000V) banana cables. The cables are
terminated with banana plugs that have retractable sheaths.
CS-751 Barrel Adapter:
This is a barrel adapter that allows
you to connect two triax cables together. Both ends of the
adapter are terminated with 3-lug female triax connectors.