![background image](http://html1.mh-extra.com/html/karcher/sb-ob/sb-ob_manual_655079274.webp)
274
Lietuviškai
Pastaba
Jei mygtukas yra pilkos spalvos, klaida vis dar yra, ir jos
negalima patvirtinti.
Jei mygtukas yra geltonos spalvos, sutrikimas pašalin-
tas, ir klaid
ą
galima patvirtinti.
5
Vykdymo indikatorius, kuris rodo, kiek laiko jau ro-
domas dabartinis pranešimas.
Pastaba
Maždaug po 2-3 sekundži
ų
vaizdas automatiškai pakei-
č
iamas
į
kit
ą
paveiksl
ė
l
į
. Tada juosta yra visiškai pereita.
6
Dabartinio pranešimo numeris / bendras pranešim
ų
skai
č
ius.
7
Mygtukai, skirti rankiniu b
ū
du slinkti pirmyn ir atgal
per skirtingus pranešim
ų
rodinius.
Pastaba
Jei
į
vyko kritin
ė
klaida,
į
renginio negalima naudoti.
Tai rodo raudona juosta atitinkamame meniu ekrane.
1
Raudona juosta, kai
į
renginys užblokuotas d
ė
l kriti-
n
ė
s klaidos
Sutrikimo rodmens pavyzdys
Į
vykio rodmens pavyzdys
Valdiklio rodomi sutrikimai
Klaidos numeris
Priežastis
Šalinimas
F0003
HP pump 1 connection. No CAN bus data connectionHP pump 1
Inform Service
F0004
HP pump 1 overload. Output overload HP pump 1
Inform Service
F0005
Remote control 1 connection. No CAN bus data connection Remote control 1
Inform Service
F0063
A39 connection. No CAN bus data connection
Inform Service
F0064
A39 overload. Output overload A39
Inform Service
F0065
A40 connection. No CAN bus data connection
Inform Service
F0066
A40 overload. Output overload A40
Inform Service
F0101
Exterior temp sensor defective
Inform Service
F0170
HP pump 1 overcurrent. Current consumption of HP pump 1 too high.
Ackowledge fault. Inform Service if fault occurs
again.
F0171
HP pump 1 minimum current. Current consumption of HP pump 1 too low
Inform Service
F0172
Relay / HP pump 1 contactor stuck. HP pump 1 electronics malfunction
Inform Service
F0174
HP pump 1 winding protect.contact
Ackowledge fault. Inform Service if fault occurs
again.
F0175
HP pump 1 overpressure
Ackowledge fault. Inform Service if fault occurs
again.
F0176
HP pump 1 oil level too low
Refill oil, Acknowledge malfunction
F0190
Coin reset remote control 1
Inform Service
F0191
Coin signal remote control 1
At mechanical coin acceptor check the micros-
witch
F0570
Hot water shortage
Check the hot water supply
F0571
Hot water overtemperature
Ackowledge fault. Inform Service if fault occurs
again.
F0572
Hot water temperature sensor defective
Inform Service
F0576
No flow detected by flow monitor
Ackowledge fault. Inform Service if fault occurs
again.
F0577
Flow monitor is defective
Ackowledge fault. Inform Service if fault occurs
again.
F0578
Automatic hot water circuit-breaker
Reset automatic circuit-breaker
F0610
BA regeneration failed. Hardness sensor indicateshard water after regeneration.
Refill salt, acknowledge fault
F0611
BA regeneration failed. Regeneration of the bottle could not be started.
Inform Service
F0612
Permeate buffer tank dry running. Have the tank filled up to the empty buffer tank level switch
(maximum switch-on delay of 15 minutes)
Have the tank filled up to the empty buffer tank
level switch (maximum switch-on delay of 15 mi-
nutes)
F0613
Permeate buffer tank level switch. Empty and full buffer tank level switches switch simultaneo-
usly
check level switch.
F0614
Permeate buffer tank level switch. Empty and full buffer tank level switches switch simultaneo-
usly
check level switch.
F0615
Water softening no water pressure
Check the water supply
F0616
On-site water treatment system
Check on-site water treatment system
F1125
Controller Batterie Back-Up Batterie Of Controller Defective
Inform Service