Inter-Tel Attendant Console, User Manual

Page: 113 / 150

97
Inter-Tel
®
Attendant Console User Guide
USING CONSOLE
P
ROGRAMMING
S
TATION
I
NFORMATION
You can program station information and DND and Reminder messages for individual
stations in the Database Programming option in the Tools drop-down menu.
NOTE:
Only Administrators can access the Database Programming option. The option
will be grayed out on the menu for all other user.
To begin programming:
1. Select Database Programming from the Console drop-down menu. The fol-
lowing screen appears:
2. Click Yes to continue. You are then prompted to enter
the database programming password, as shown in the
screen on the right. Enter the password (up to eight dig-
its) and click
OK . (If there is no password, simply click
OK .)
3. After you enter a valid password, the Attendant Console will retrieve data from
the system. When the data transfer is complete, you will see the following screen.
From this screen you can perform any of the programming procedures described
in the following pages.