Intel Pentium Pro Family Developer'S Manual Download Page 2 | Manualshive

Page: 2 / 328

Intel Pentium Pro Family Developer'S Manual Download Page 2

PATENT NOTICE

Through its investment in computer technology, Intel Corporation (Intel) has acquired numerous
proprietary rights, including patents issued by the U.S. Patent and Trademark Office. Intel has
patents covering the use or implementation of processors in combination with other products,
e.g., certain computer systems. System and method patents or pending patents, of Intel and
others, may apply to these systems. A separate license may be required for their use (see Intel
Terms and Conditions for details). Specific Intel patents include U.S. patent 4,972,338.

Information in this document is provided in connection with Intel products. Intel assumes no liability whatsoever,
including infringement of any patent or copyright, for sale and use of Intel products except as provided in Intel’s Terms
and Conditions of Sale for such products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein.

Intel retains the right to make changes to these specifications at any time, without notice. Microcomputer Products
may have minor variations to this specification known as errata.

*Other brands and names are the property of their respective owners.

†Since publication of documents referenced in this document, registration of the Pentium, OverDrive and iCOMP
trademarks has been issued to Intel Corporation.

Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product
order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature,
may be obtained from:

Intel Corporation
P.O. Box 7641
Mt. Prospect, IL 60056-7641

or call 1-800-879-4683

COPYRIGHT © INTEL CORPORATION 1996

«
1
2
3
4
...
»

Summary of Contents for Pentium Pro Family









































































































































































































































































































































Reviews:

No comments