manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1298 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1298

1 Monitoring with WindO/I-NV4

25-4

WindO/I-NV4 User’s Manual

1.2 Debugging in WindO/I-NV4

This section describes the procedure for monitoring values of device addresses and debugging in WindO/I-NV4.

1

Change the communication setting to match the connection method between computer and MICRO/I.
For details, refer to Chapter 24 “1.3 Change Communication Settings” on page 24-5.

2

On the 

Online 

tab, in the 

Monitors 

group, click 

Start Monitor

.

The MICRO/I switches to monitor mode and 

Monitor Mode

 is displayed at the bottom left of the screen.

3

On the 

Online

 tab, in the 

Monitors

 group, click the following button or enter the number to the text box to switch 

the screen displayed on the MICRO/I to the Monitor screen.

■

 (Back)

You are returned to the Base Screen that was displayed immediately before the screen was switched.

■

 (Forward)

Advances to the Base Screen that was displayed immediately before the screen was switched using 

 (

Back

).

■

 (First Screen)

Switches to the Base Screen of the lowest screen number in the project data.

■

 (Previous Screen)

Switches to the Base Screen of screen number one lower than the Base Screen currently displayed. If the screen 
numbers are not sequential, switches to the screen of next lowest number.

■

 (Specified Screen)

Switches to the Base Screen with the specified number.

■

 (Next Screen)

Switches to the screen with screen number one higher than the Base Screen currently displayed. If the screen 
numbers are not consecutive, switches to the screen of next highest number.

■

 (Last Screen)

Switches to the Base Screen of highest screen number in the project data.

If a password has been configured for the project data, the Enter Password screen will be displayed. Enter 
the password. For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.

To change values of device addresses and check the operation of project data offline, first switch to monitor 
mode, and then on the 

Online

 tab, in the 

Monitors

 group, click 

Go Offline

.

The MICRO/I switches to offline mode and 

Offline mode

 is displayed at the bottom left of the screen.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments