manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 963 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 963

WindO/I-NV4 User’s Manual

13-19

3 Alarm Log Settings Dialog Box

13

Alarm Log Function

■

Channel Settings

The trigger condition for the channel is configured here.

Alarm function:

Selects whether or not to use the alarm function.

Enable:

Monitors the state of the device address configured for the channel and samples 
the alarm information.

Disable: Does not monitor the state of the device address. No Alarm Log data is created.

NO/NC:

Selects the alarm detection condition.

NO:

The alarm occurs when the monitored bit changes from 0 to 1.

NC:

The alarm occurs when the monitored bit changes from 1 to 0.

Lock/Unlock:

Selects whether or not to automatically recover based on the state of the monitored bit.

Lock:

Even if the monitored bit returns the normal state, the alarm remains active until 
the key button 

CHECK

 is pressed.

Unlock:

The alarm is automatically recovered from based on the bit state when the 
monitored bit returns the normal state.

Example:

NO/NC

 is 

NO

Press 

CHECK

Record confirmaon me

Record recovery me

Record occurrence me

Unlock

Record confirmaon me

Record recovery me

No operaon

Record occurrence me

Lock

0

1

0

1

Monitored bit

Alarm occurred

The display on the Alarm List Display disappears when the alarm is recovered from, regardless of the 

Lock/

Unlock

 setting. To keep displaying the alarm until 

CHECK

 is pressed, use the Alarm Log Display.

Text ID:

To use text registered in Text Manager as the message to display when an alarm occurs, 
select this check box and specify the Text Manager ID number to use as the message. 
Number of blocks x 16 (number of channels) text IDs are used starting from the set ID 
number.

Click 

 to open Text Manager where you can edit the text.

Text:

Shows the text for the specified text ID.

Reference Screen Number: Specifies the screen number (1 to 3000) to display when the key button 

Ref.

 is pressed. 

Number of blocks x 16 (number of channels) screens are used starting from the screen 
number.
This option can only be configured when 

Base Screen

 or 

Popup Screen

 is selected in 

Reference Screen

.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments