IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1549 / 1665

WindO/I-NV4 User’s Manual
34-9
3 Settings
34
MICRO/
I Se
tup
●
Initialize (Initialize)
From the Main Menu screen, press Initial Setting (Initial Setting) , and then Initialize (Initialize) to display the
initialization menu screen.
You can use this screen to set the following items. Press the button for each item to set it.
■
Alarm Log (Alarm Log)
Clears all the alarm log data.
From the Main Menu screen, press
Initial Setting (Initial Setting), Initialize (Initialize), and then Alarm Log
(Alarm Log) .
Press Yes to clear the Alarm Log data.
■
Data Log (Data Log)
Clears all the data logged from Data Log.
From the Main Menu screen, press
Initial Setting (Initial Setting), Initialize (Initialize), and then Data Log
(Data Log) .
Press Yes to clear the Data Log data.
■
Operation Log (Op. Log)
Clears all the operation log data.
From the Main Menu screen, press
Initial Setting (Initial Setting), Initialize (Initialize), and then Operation
Log (Op. Log) .
Press Yes to clear the Operation Log data.
■
Touch Panel Adjust (TP Adjust)
Adjusts the analog touch panel.
From the Main Menu screen, press
Initial Setting (Initial Setting), Initialize (Initialize), and then Touch
Panel Adjust (TP Adjust) . The position of the analog touch panel is properly adjusted and set.
Press Yes and adjust the touch panel according to the instructions on the screen.
●
External Device (Ext. Device)
From the Main Menu screen, press Initial Setting (Initial Setting) , External Device (Ext.Device) , and then
External Device 1 (Ext.Device 1) , External Device 2 (Ext.Device 2) , External Device 3(Ext.Device 3) or
External Device 4 (Ext.Device 4) to display the menu screen for the external device communication.
To specify settings, press the button to select a choice. External Device Communication setting items vary based on
the currently connected hardware. For details about settings, refer to the WindO/I-NV4 External Device Setup Manual.
If
Not Use are selected from the Communication Driver , you cannot select this option.
●
O/I Link (O/I Link)
From the Main Menu, press Initial Setting (Initial Setting), and then O/I Link (O/I Link) to display the O/I link
menu screen.
This screen presents information on the O/I Link.
Various settings can be made by pressing
O/I Link Setting1 (O/I Link Set1) or O/I Link Setting 2 (O/I Link Set2) .
• To return to the initial settings screen, press Init Set (Init Set) at the top of the screen.
• To return to the initialization menu screen from any of the settings screens below, press Init (Init) at the
top of the screen.
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F HG2G-5T, HG1G/1P
Press the center of each symbol displayed on the screen, in
the following order: upper-left corner, upper-right corner, lower-
right corner, lower-left corner of the MICRO/I screen.
Press the center of each symbol displayed on the screen, in
the following order: lower-left corner, lower-right corner, upper-
right corner, upper-left corner of the MICRO/I screen.
Press the center of the symbol.
Press the center of the symbol.
To return to the initial settings screen, press Init Set at the top of the screen.
• To return to the initial settings screen, press Init Set (Init Set) at the top of the screen.
• For details about settings, refer to the WindO/I-NV4 External Device Setup Manual.