manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1325 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1325

WindO/I-NV4 User’s Manual

26-3

2 Using the Simulator

26

Simulator Funct

ion

  

2.1 Starting the Simulator

●

Starting the Simulator

1

Open the project data on which to perform the operation check.

2

On the 

Online

 tab, in the 

Simulator

 group, click the 

Simulator

 icon.

The project data being edited will be loaded and the simulator will start.

●

Starting the Simulator by Loading or Clearing Device Addresses

If the 

Save Value of Device Address (External Device, LK, LKR)

 check box is selected and the simulator is 

terminated, the loading method of the project data can be selected when the simulator is next started.

1

Open the project data on which to perform the operation check.

2

On the 

Online

 tab, in the 

Simulator

 group, click the 

▼

 arrow under 

Simulator

.

3

Select the loading method of the project data.
The project data being edited will be loaded and the simulator will start.

■

Load Value of Device Address

 

(External Device, LK, LKR) and Run

The saved values of device addresses on the external device, HMI keep relays (LK), and HMI keep registers (LKR) will 
be loaded when the project data is loaded.

■

Clear Value of Device Address

 

(External Device, LK, LKR) and Run

The saved values of device addresses on the external device, HMI keep relays (LK), and HMI keep registers (LKR) will 
be cleared when the project data is loaded.

2

Using the Simulator

HG3G

HG2G-5F

HG5G-V HG4G-V

HG3G-V

HG2G-V

HG2G-5T

HG4G

HG1G HG1P

If the project data was changed before the simulator is started, a save confirmation message will be 
displayed.

• Click 

OK

 to save the project data and start the simulator.

• Click 

Cancel

 to cancel starting the simulator. You will be returned to the editing screen and the project 

data will not be saved.

The simulator cannot load project data that cannot be downloaded to the MICRO/I.

If the project data was changed, a confirmation message to save the project data is displayed.

• Click 

OK

 to save the project data and start the simulator.

• Click 

Cancel

 to cancel starting the simulator. You will be returned to the editing screen and the project 

data will not be saved.

The simulator cannot load project data that cannot be downloaded to the MICRO/I.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments