manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1104 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1104

2 Text Groups and Text Configuration Procedure

19-8

WindO/I-NV4 User’s Manual

An Import dialog box is displayed if a text ID is included in the text list however it has already been registered on the 
Text Manager. Here are your options: 

• Click 

Yes

 to overwrite the text in the text list with the text of the displayed text ID, and then to display confirmation 

to overwrite the next text ID.

• Click 

Yes To All

 to overwrite all the text in the text list without displaying the Import dialog box subsequently.

• Click 

No

 to display the next confirmation to overwrite without overwriting the text with the displayed Text Manager 

ID.

• Click 

Cancel

 to stop importing text.

The imported text is displayed in the Text Manager.

This concludes importing text from a text list.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments