manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1389 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1389

WindO/I-NV4 User’s Manual

28-41

4 E-mail Function

28

Maintenance

4.4 Verified SMTP Servers

The e-mail function has been verified to work with the following SMTP servers. (As of October 2017)

4.5 E-mail Sending Operation

The MICRO/I cannot simultaneously send multiple e-mails. Accordingly, when there are multiple e-mail sending 
events, such as multiple trigger conditions to send an e-mail are the same or multiple trigger conditions are satisfied 
at the same time, the e-mails are sent in the order described below.

■

Multiple trigger conditions to send an e-mail are the same or the different trigger conditions are 
satisfied at the same time

When multiple trigger conditions to send an e-mail are the same or when the different trigger conditions are satisfied 
at the same time (the values of multiple trigger device addresses change to 1 at the same time), e-mails are sent in 
the order of smaller number. Triggered e-mails will be in "Waiting" status while sending another e-mail is in progress.
For example, if the trigger conditions for e-mail number 1 and e-mail number 2 are the same, once the trigger 
conditions are satisfied, e-mail number 1 starts to be sent, and e-mail number 2 is in "Waiting" status. After the e-mail 
number 1 has been sent, the e-mail number 2 starts to be sent. 

■

When the trigger condition is satisfied during the other e-mail is being sent

When sending an e-mail is in progress and the trigger condition to send another e-mail is satisfied, triggered e-mail 
will be in "Waiting" status. Such e-mail is sent after all the e-mails in sending or waiting status have been sent.
For example, if the trigger condition for the e-mail number 2 is satisfied during the e-mail number 1 is sending, 
number 2 is in "Waiting" status. After the e-mail number 1 has been sent, the e-mail number 2 starts to be sent.

■

When the trigger condition is satisfied again during the e-mail is being sent

While sending an e-mail is in progress or an e-mail is in "Waiting" status, if the trigger condition to send such e-mail 
is satisfied, such trigger condition is disregarded.
For example, if the trigger condition for the e-mail number 1 is satisfied again during which it is being sent, the e-mail 
will be not "Waiting" status so the same e-mail is not going to be sent twice.

Mail Server

Host Name

Gmail

smtp.gmail.com

Yahoo mail (USA)

plus.smtp.mail.yahoo.com

Yahoo mail (JAPAN)

smtp.mail.yahoo.co.jp

Condition

(No.1, 2)

E-mail

(No.1)

E-mail

(No.2)

Satisfied

Not satisfied

Sending

Sending

Waiting

Condition

(No.1)

E-mail

(No.1)

E-mail

(No.2)

Satisfied

Not satisfied

Condition

(No.2)

Satisfied

Not satisfied

Sending

Sending

Waiting

Condition

(No.1)

E-mail

(No.1)

Satisfied

Not satisfied

Sending

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments