IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1105 / 1665

WindO/I-NV4 User’s Manual
19-9
2 Text Groups and Text Configuration Procedure
19
Te
xt G
ro
up
2.2 Switching the Displayed Language by Value of Device Address
When multiple text groups have been created, the text group can be switched with a value of device address to
display a different language.
This section describes an example when the registration text for a button changes between English, Chinese, and
Japanese.
1 Following the steps in “2.1 How to Create the Text Groups and Text Registrations” on page 19-3, specify Number of
Text Groups as 3, and under Text Group Name , enter “English” for Group 1 , “Chinese” for Group 2 , and
“Japanese” for Group 3 . Set Change Text Group by Device Address to D100.
Register the following text.
2
Create a Bit Button.
On the
Home tab, in the Parts group, click Buttons , and then click Bit Button .
3 Click a point on the edit screen where you want to place the Bit Button.
External device
MICRO/I
RUN STOP
Bit Button 2 (Text ID: 2)
Bit Button 1 (Text ID: 1)
䘆㺂 ڒ↘
D100 :
D100 :
D100 :
1
2
3
Text ID: 1
Group 1: English Group 2: Chinese
Text ID: 2
Group 3: Japanese
ڒ↘
RUN
STOP
䘆㺂 運転
停止
運転 停止
Text ID: 1
運転
Group 1: English Group 2: Chinese
䘆㺂
Text ID: 2
停止 ڒ↘
Group 3: Japanese
RUN
STOP